Give your RPG and tabletop wargames a dockside feel with our 3D printed terrain piece, Shackton Boarding House. Created by Ian Lovecraft and manufactured by Laser Craft Workshop, the Boarding House features three levels of play subdivided into many small rooms and balconies. The exterior features wood plank siding with repairs, carved balcony posts, overhanging floors, and a metal stovepipe mounted on the side. The interior has been subdivided into several small rooms for rents. While the doors may be assembled fixed in place, the 3D printed design allows for the insertion of a pin (not included) to make them moveable. 

The assembled Boarding House occupies a 5-3/4 by 6-1/4 inch footprint on your tabletop. Allow some slight extra space for the overhanging floors and balconies. The building stands roughly 9-3/4 inches tall. It breaks down into 4 distinct levels. The bottom three featuring playable spaces while the last is a roof topper. Each level stands between 2-1/4 and 2-1/2 inches tall.

The 3D printed kit includes a number of doors for the structure. We recommend straightened paperclips for the door hinges. A small amount of 2-part epoxy in the holes at the bottom and top of the door frame will hold the pin firmly allowing the door to swing.

The 3D printed terrain, Shackton Boarding House, is made under license with Ian Lovecraft. Our 3D printed terrain is made from PLA with 0.15-layer height for high resolution and superb quality.